Product Search :
 
 
Alphabetical Distribution of Products
DISTRIBUTORS
STOCKIST
SUPPLIERS
Swastik Scientific Catalogue
COATING THICKNESS GAUGES  
 
  • Coatmeter
A)For Non-Magnetic Coatings On Magnetic Base :
1) Digital Meter For Coatings On MS
2) Coatmeasure- M2s , Range: 2000 Microns
3) Coatmeasure - M6s, Range : 6MM
4)Coatmeasure - M12s , Range : 12MM
Digital Coating Thickness Gauge –
B) For Non-Conductive Coatings On Conductive Base
Digital Meter For Anodising and Coatings On AI & Brass :
1) Coatmeasure-C2s , Range : 2000 Microns, {0 To 20 (0.1) & 20 To 2,000 (1) Micron}
2) Coatmeasure-C4s, Range : 4000 Microns
C) For both Ferrous & Non-Ferrous bases :
Coatmeasure - ( M & C )2s, Range : 0-2000 Microns
 
  • COATMETER : Dial Type Fixed Probe Gauge Spot Calibrationon nearest Testfoil for better accuracy Range :
    a) 100,200,300,600 Micron ( Any One )
    b) 1, 3, 6, 0.5-9 MM ( Any One )
 
  • Coating Thickness Gauge - COATGAUGE : Pen Type Pull-Off Gauge, Also reads in Thou and on equally divided scale,0-600 Microns
 
  • Coatest AA Make Made In India Pull-Off Type (For Vertical Use Only) 0 To 250 Micron Or 50 To 800 Micron (Any) 1815 Picture code
 
  • Thickness Gauge (Throat Depth 40 mm)
    a) Dial Type Resolution : 0.01 - Range : 0-10 mm, Resolution : 0.01 - Range : 0-25 mm, Resolution : 0.001 - Range : 0-1 mm
    b) Digimatic (Digital Type) Acc : 0.01 - Range : 0-12 mm, Acc : 0.01 - Range : 0-25 mm, Acc : 0.001 - Range : 0-1 mm
 
  • Digital Coating Thickness Meter, Model : CM-8821 (Micro Computer Based)
    Range : 0 to 2,000um ( F Type= Non Magnetic Coatong on Magnetic Material )
    For Measuring The Thickness Of Any Non Magnetic Material (Paint Plastic Porcelain Enamel Copper Zinc Aluminium Chrome Etc) On Magnetic Bases (Iron Nickel Etc) Like Plating Layer Lacqure Layer Porcelain Enamel Layer Phosphide layer Copper
    Aluminium & Paper
 
  • Model CM - 8823,( NF Type = Non Magnetic Coating On Mon Magnetic Material ) Range: 0-1000 Microns/0-40mil
 
  • Model CM-8825 Fnf (Micro Computer Based) Ferrous & Non Ferrous Combined ( 2 in 1, F & NF type )
    Range : 0 To 200um/500um/1000um/2000um Data Output Rs-232 Interface
 
  • Model TM-8810 (Micro Computer Based)
    Range : 0 to 200um Thickness Meter, Microcomputer based, Ultrasonic,
    For Measuring The Thickness Of Steel Cast Iorn Aluminium Red Copper Brass Zinc Quartz Glass Polyethylene Pvc Gray Cast Iron
 
  • Model TM - 8811 , Same as above but with sound velocity 2000-8000 m/s
    Model : TM - 8812 (micro Computer Based)
    Range : 1.2 to 225 mm / 0.05 to 9 inch RS-232 Interface, with sound Velocity : 2000 - 8000 m/s
 
  • SHORE A HARDNESS TESTER
    a) Indian
    b) Japan
 
  • DIGITAL SHORE A HARDNESS TESTER, Model No.6510 A, 4 Digit-10mm LCD Display, Imported
    Range : 10~90H, Resolution : 0.1, Test Specimen Min 6 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) Battery
    To Measure the Hardness of : Rubber, Elastomers, Silicon Substances, Soft Plastic, Felt, Leather
 
  • DIGITAL SHORE D HARDNESS TESTER, Model No.6510 D, 4 Digit-10mm LCD Display, Imported
    Range : 10~90H, Resolution : 0.1, Test Specimen Min 3 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) Battery
    To Measure the Hardness of : Plastics, Formica, Plexiglass, etc
 
  • SHORE D HARDNESS TESTER INDIAN
 
  • Surface Roughness Tester, Model No.SRT-6210,. 4 Digit-10mm LCD Display, with blue / Black Light Imported
    Sensor : Inducutance Type, Radus of Probe Pin : 5, Material of Probe Pin : Diamond
    Parameters : Ra, Rq, Rz, Rt. Measuring Range : Ra, Rq : 0.005 ~ 16.00um / 0.020 ~ 629.9uinch,
    Rz, Rt : 0.020 ~ 160.0um / 0.078 ~ 6299uinch
 
  • Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-605
 
  • Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-606
 
  • Digital Electronic Thickness Guage Mitu-Toyo Japan
    Model : 700-110sue Range : 0-12mm/0.01mm, 700-122sue Range : 0-25mm/0.01mm
 
  • Wet Film Thickness Gauge (upto 0.004") Circular Type
 
  • Dry Film Thickness Gauge (Dial Indicator Type)
 
 
 
Powered By : Pinnacle Pixel